Xenics’ XTM 640 is an extremely compact and versatile thermal camera module with unique image quality and stability for a broad range of OEM applic
") //-->
The Gobi 640 is perfectly suited for high-speed imaging in full 640x480 resolution with frame rates up to 50 Hz or higher in windowing mode. The Gobi 640 combines high image quality with high thermal resolution and accurate thermal analysis capabilities.
Setup and use of the Gobi cameras are hassle-free, with simplified startup procedures and compatibility with industry standard accessories. Interfacing can be done either through CameraLink or via GigE Vision.
The Gobi 640 offers full flexibility regarding system integration. A variety of interchangeable lenses and extensive software customization tools further supports this.
Together, these attributes ensure the Gobi 640 is able to provide a fast, accurate and cost-effective evaluation of your thermal imaging needs.
Contact us for advice, detailed information and quotations.
![]() IR camera software included Xeneth camera control and imaging software is included |
![]() SWaP (Small size, weight and power ) Small volume, low weight and low power consumption for demanding applications |
![]() Trigger External trigger for signal synchronization |
![]() Windowing mode Imaging in a reduced window of interest for increased frame rates |
![]() 16 bit image Digitization: The camera uses a 16 bit ADC |
![]() High sensitivity Low noise equivalent temperature difference (NETD) |
![]() High resolution 640x480 pixel resolution |
![]() Extremely compact Small form-factor product |
Mechanical specifications | Gobi 640 GigE | Gobi 640 CL |
Dimensions (width x height x length) - excluding lens (approximately) | 49 x 49 x 79 mm | 49 x 49 x 62 mm |
Weight (excluding lens) | 263 gr | 208 gr |
Optical interface | M42 or M34 x 0.75 | |
Connector GigE | RJ-45 | NA |
Connector CameraLink | NA | Standard SDR |
Connector power | Hirose HR10-7R-SA(73) | |
Connector trigger | SMA |
Environmental & power specifications | Gobi 640 GigE | Gobi 640 CL |
Ambient operating temperature range | -40ºC to 60ºC | |
Storage temperature range | -45°C to 85°C | |
Power consumption | 4.5 W | 2 W |
Power supply | DC 12 V | |
Shock | 40 g, 11 ms according to MIL-STD810G/MIL-STD883J | |
Vibration | 5 g (20 Hz to 2000 Hz) according to MIL-STD810G/MIL-STD883J | |
IP rating | IP 40 |
Electro-optical specifications | Gobi 640 GigE | Gobi 640 CL |
Image format | 640 (w) x 480 (h) pixels | |
Pixel pitch | 17 μm | |
Detector type | a-Si microbolometer | |
Integration type | Rolling shutter | |
Active area and diagonal | 10.88 mm x 8.16 mm (13.6 mm diagonal) | |
Detector NETD (Noise Equivalent Temperature Difference) | <55 mK (at 30 Hz, 300 K, F/1) | |
Spectral range | 8 μm to 14 μm | |
Pixel operability | >99% (excluding 3 peripheral lines and columns) | |
Maximum frame rate (full frame) | 50 Hz or 9 Hz | |
Integration time range | 1 μs - 80 μs | |
Region of interest | Yes (higher frame rates possible for smaller windows) | |
Min region size | 160 x 120 pixels | |
Analog-to-Digital (ADC) | 16 bits | |
Command and control | GigE Vision | CameraLink |
Digital output format | 16 bit GigE Vision | 16 bit base CameraLink |
Trigger | in or out via SMA (configurable) (not for 9Hz) | in or out via SMA or CL-CC1 (configurable) |
Xenics’ XTM 640 is an extremely compact and versatile thermal camera module with unique image quality and stability for a broad range of OEM applic
Thermal electronics inspection | Xenics thermal cameras can detect heat defects in electronics before qualification, saving a considerable amount of time and money. The cameras can also be used for critical control of heat dissipation in a working instrument to optimize its life-cycle. |
360° Perimeter Security | FOVEA, a 360° surveillance system based on the Gobi-640, is an efficient and cost-friendly monitoring system to keep your property safe, day and night. |
Haas Laser Technologies partners with Xenics | Using a Gobi-640-GigE microbolometer camera from Xenics, Haas Laser Technologies, Inc. has developed a compact, all passive optical design laser beam analyser for focused laser beams from a CO2 laser with wavelength range from 9.3 to 10.6 μm. |
High resolution Gobi-640 determines healing prospects of burn wounds | Medical infrared imaging - High resolution thermal camera Gobi-640 determines the healing prospects of burn wounds. |
Thermal imaging for monitoring rolling element bearings | To be reliably operated off-shore wind turbines need an assured downtime and maintenance pattern to keep costs low. A monitoring project carried out by the authors uses an infrared (LWIR) thermal camera placed in the drive trains of such turbines and focusing on their spherical roller bearings. |
Laser beam profiling and infrared cameras | In this white paper, we will address the general need for laser beam profile analysis. Further, we will briefly describe laser beam analysis instruments and give an overview of laser applications, in particular for infrared wavelengths. |
T3 Gobi - GigE D | This file contains all the technical documents for the Gobi GigE camera. |
T3 Gobi - CL D | This file contains all the technical documents for the Gobi CL camera. |
Secure in Air appreciates the professional service, knowledge and advice of Xenics in implementing the Gobi camera in our project GeoCampro. Our client was more than satisfied with the results, looking for (thermal) defects in the railways.