Products

Drag your mouse over the image to rotate the camera.

XTM+ series

High resolution uncooled thermal OEM module

Ready-to-integrate thermal OEM module

The versatility of the XTM thermal camera module is expanded with the introduction of the XTM+ series.

Retaining its compact form and low power consumption, the XTM+ receives a performance boost to tackle applications with higher imaging requirements. Able to provide frame rates up to 60 Hz, the improved XTM+ will be beneficial for imaging applications at high speeds. The XTM+ comes with onboard image processing and interface controls. Furthermore, image quality is also enhanced with lower Noise Equivalent Temperature Difference of 50 mK and better pixel operability.

Incorporating the XTM+ into integrated systems is easy, with an extensive selection of interface options to choose from. 

The XTM+ is the perfect solution for those looking for effective thermal imaging in a broad range of OEM applications.

Are you looking for more information?

Contact us for advice, detailed information and quotations.

Get in touch

 

Benefits & features

  • Low power
    Low power consumption for easy integration, also in portable systems
  • High resolution
    640x480 Image resolution
  • Easy connectivity
    Various interfaces available
  • Small size, 17 μm pixel pitch
    Small form factor thermal imaging core with excellent image quality
  • Higher speed imaging
    Increased frame rates push the limitations in high-speed thermal imaging

Designed for use in

  • UAV / UGV
    XTM+ cores can be used as thermal and electro-optical payloads for UAV platforms
  • Gimbal
    Small and lightweight. Suitable for integration into a Gimbal
  • Night vision
    Thermal imager detects heat signature at night.
  • Thermal sights
    XTM+ core can be integrated into portable thermal sights for target acquisition
  • Border security
    Thermal imager detects heat signature at night. SWIR imager for day and starlight imaging
  • Fire fighting
    Able to detect hotspots
  • Driver assistance
    Thermal imager detects heat signature at night. SWIR imager for day and starlight imaging
  • Police surveillance
    Able to detect heat signature in darkness
  • Search & Rescue (SAR)
    Thermal imagers are able to detect heat from subject, essential for night search and rescue operations.

Features

Compatible with a variety of framegrabbers

Several compatible frame grabbers for CameraLink interface are available (Euresys Grablink Full, NI 1433 and Imperx Framelink Express VCE-CLEX01).

GigE Vision standard compatibility

The Gigabit Ethernet interface is compatible to the GigE Vision standard

Video output

Analog video output available

SWaP (Small size, weight and power )

Small volume, low weight and low power consumption for demanding applications

Trigger

External trigger for signal synchronization

Windowing mode

Imaging in a reduced window of interest for increased frame rates

16 bit image

Digitization: The module uses a 16 bit ADC

High sensitivity

Low noise equivalent temperature difference (NETD)

High resolution

640x480 pixel resolution

Day & Night Vision

The camera can operate under daylight or nighttime conditions

Camera specifications

Mechanical specifications

Mechanical specifications XTM+ 640 GigE XTM+ 640 CL XTM+ 640 PAL/NTSC
Dimensions (width x height x length) - excluding lens (approximately) 45 x 45 x 63 mm 45 x 45 x 45 mm 45 x 45 x 47 mm
Weight (excluding lens) 125 gr 84 gr 99 gr
Optical interface M42 or M34 x 0.75
Connector GigE RJ-45 NA NA 
Connector CameraLink NA Standard SDR NA 
Connector power Hirose HR10-7R-SA(73)
Connector trigger SMA
Connector analog NA NA  BNC
Connector RS232 NA NA  RJ-12

Environmental & power specifications

Environmental & power specifications XTM+ 640 GigE XTM+ 640 CL XTM+ 640 PAL/NTSC
Ambient operating temperature range -40ºC to 60ºC
Storage temperature range -40ºC to 85ºC
Power consumption 4.5 W 2 W
Power supply DC 12 V

Electro-optical specifications

Electro-optical specifications XTM+ 640 GigE XTM+ 640 CL XTM+ 640 PAL/NTSC
Image format 640 (w) x 480 (h) pixels
Pixel pitch 17 μm
Detector type a-Si microbolometer
Integration type Rolling shutter
Active area and diagonal 10.88 mm x 8.16 mm (13.6 mm diagonal)
Detector NETD (Noise Equivalent Temperature Difference) <50 mK (at 30 Hz, 300 K, F/1)
Spectral range 8 μm to 14 μm
Pixel operability > 99.5 %
Maximum frame rate (full frame) 60 Hz or 9 Hz 25 Hz (PAL), 30 Hz or 9 Hz (NTSC)
Integration time range 1 μs - 80 μs
Region of interest Yes
Min region size 160 x 120 pixels
Analog-to-Digital (ADC) 16 bits
Command and control GigE Vision CameraLink RS232 (XSP)
Digital output format 16 bit GigE Vision 16 bit base CameraLink -
Trigger in or out via SMA (configurable) (not for 9Hz) in or out via SMA or CL-CC1 (configurable) (not for 9Hz) in or out via SMA (configurable) (not for 9Hz)

Broad range of accessories available

Lens & filter options

Software

  • Xeneth
  • Xeneth SDK (optional)

Documents

Application notes
Thermal camera cores for reconnaissance robots Customer Success Story - XTM thermal OEM core installed on reconnaissance robot
Dual-Band Monitoring Keeps Trains Running in Winter Keeping critical parts of the railroad infrastructure free of snow, sleet, hail and ice – and even detecting unauthorized persons walking the rails – is essential for a safe and uninterrupted transportation service. Dual-band monitoring of critical rail elements with a PTZ (pan, tilt and zoom) camera platform in the visible and thermal infrared ranges can remotely inspect installed switch heaters at a range of up to 2000 ft.
Press Releases
Xenics at SPIE DSS 2011: high performance infrared OEM modules for easy integration We offer high resolution infrared OEM modules in both SWIR (XSW-640) as LWIR (XTM-640) (2011)
Xenics sees strong growth ahead for OEM module business The OEM module business will grow strongly, especially in the security market. That is why we target the security market with our XenicsCores (2014)
Infrared cameras for security applications Xenics returns to DSEI with its line up of cameras suited for safety & security applications.
Technical documents
T3 XTM C This file contains all the technical documents for the XTM camera core.

Professional service, knowledge and advice!

Secure in Air appreciates the professional service, knowledge and advice of Xenics in implementing the Gobi camera in our project GeoCampro. Our client was more than satisfied with the results, looking for (thermal) defects in the railways. 

Robert de Nes, Secure in Air