Short-Wave Infrared (SWIR)

Bobcat 320 TE0 and WL Series

Small, low cost, uncooled InGaAs camera

The Bobcat 320 TE0 and WL series are based on an in-house developed, uncooled InGaAs detector with a 320 x 256 pixel resolution.

The Bobcat 320 TE0 and WL cameras are offered with GigE Vision interface, 400 Hz maximum frame rate and feature low weight and power.

The Bobcat 320 WL comes with a windowless uncooled detector, specifically targeting laser beam analysis and laser wavefront sensing applications.

Benefits & Features
• Low cost
• Flexible and easy-to-use
• Low dark current
• High speed 400 Hz
• Windowless version optional (WL)

Mechanical Specifications

Bobcat 320 TE0 GigE 400 Bobcat 320 WL GigE 400
Approximate dimensions - excluding lens [width x height x length] [mm] 55 x 55 x 74 55 x 55 x 74
Weight [gr] - excluding lens 280 280
Optical interface C-mount or M42 C-mount or M42
Connector GigE RJ-45 RJ-45
Connector CameraLink - -
Connector power Hirose HR10-7R-SA[73] Hirose HR10-7R-SA[73]
Connector trigger SMA SMA

Environmental & Power Specifications

Bobcat 320 TE0 GigE 400 Bobcat 320 WL GigE 400
Operating case temperature [°C] From -40 to +70;
also available in temperature range 0 - 50
From -40 to +70;
also available in temperature range 0 - 50
Storage temperature [°C] From -45 to +85 From -45 to +85
Power consumption [W] 4 4
Power supply voltage DC 12 V DC 12 V
Shock IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms] IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms]
Vibration Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz] Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz]
IP rating IP40 IP40
Regulatory compliance CE, RoHS CE, RoHS

Electro-Optical Specifications

Bobcat 320 TE0 GigE 400 Bobcat 320 WL GigE 400
Image format [pixels] 320 x 256 320 x 256
Pixel pitch [µm] 20 20
Detector type InGaAs photodiode array with CTIA ROIC InGaAs photodiode array with CTIA ROIC
Sensor temperature stabilization Uncooled Uncooled and windowless detector
Integration type Snapshot - global shutter Snapshot - global shutter
Active area and diagonal [mm] 6.4 x 5.12 [diagonal 8.2] 6.4 x 5.12 [diagonal 8.2]
Optical fill factor 100% 100%
Spectral range [nm] 900 - 1700 900 - 1700
Quantum efficiency ~80% [typical peak value] ~80% [typical peak value]
Gain modes Single Gain Single Gain
Full well capacities [electrons] 70k 70k
Read noise [electrons] 110 110
Dark current [electrons/second] <2E6 [for 150 mV reverse bias] typically <2E6 [for 150 mV reverse bias] typically
Read out mode ITR ITR
Pixel operability >99.5% >99.5%
Preconfigured exposure time range [ms] 0.5 to 4 0.5 to 4
Max frame rate [Hz] [full frame] 400 400
Region of interest Yes Yes
Min region size [pixels] 32 x 4 [step 4 x 1] 32 x 4 [step 4 x 1]
Max frame rate [Hz] [min region size] >10000 >10000
Analog-to-Digital [ADC] [bits] 14 14
Command and control GigE Vision GigE Vision
Digital output format GigE Vision [16 bit] GigE Vision [16 bit]
Trigger In or out via SMA [Configurable] In or out via SMA [Configurable]

Software

Our standard IR software, Xeneth, is included with this camera. Find Out More

Lenses

Our cameras are compatible with a wide variety of lenses.

We do not manufacture our own lenses, but instead offer a variety of third-party lenses that can be purchased directly from us. We guarantee compatibility for any lenses purchased directly from Xenics.

Cables & Power Supplies

Xenics develops flexible and modular cameras resulting in a wide variety of camera interfaces. All these interfaces require unique cabling which we keep in stock. Next to interface cables we also offer separate power supplies.

Cases

Xenics ships its infrared cameras all over the world in high-grade custom cases. As our infrared cameras have different sizes, we have several case-types in stock guaranteeing a tight fit. The cases are made of polypropylene which make them very sturdy. They are dustproof, watertight, stackable and can cope with temperatures between -40 °C and 80 °C. In addition they are equipped with an automatic air pressure compensation valve allowing us to ship the cameras all over the globe.

Most of our infrared cameras come with a standard hardshell case upon purchasing.

Filters

A filter can be fitted in the C-mount lens adapter of most Xenics cameras. The following Xenics SWIR cameras have a standard filter holder in the C-mount adapter (only one filter can be mounted and filter has to be 25.4 mm in diameter):

  1. Bobcat 320 and 640
  2. Cheetah 640 CL
  3. Xeva 320 (exceptions: Xeva 2.35)
  4. Lynx

In order to lock the filter in the c-mount adapter, the following filter retainer ring has to be ordered from Xenics, part number: MEC-000614

For a list of suitable filters, please directly contact the filter supplier, Spectrogon, for filter purchases. Please check camera and filter documentation for compatible wavelength ranges.

Part number Description
XEN-000730 Bobcat 320 TE0 GigE 400
XEN-000731 Bobcat 320 WL GigE 400

Machine Vision

Process Monitoring

Scientific & Advanced Research

Datasheets

Download Datasheet

Engineering files

The compressed file contains technical files pertaining to this product. Typically it contains the following:

  • EASM (eDrawings Assembly) file for the camera.
  • STEP (Standard for the Exchange of Product Data) file for the camera.
  • Technical drawing for the camera.

Bobcat 320 TE0 and WL Series

Looking For More Details?

Fill up the form below and our customer support team will get be glad to assist you with your queries.






    Bobcat 320 TE0 and WL Series

    Bobcat 320 TE0 and WL Series Image

    Small, low cost, uncooled InGaAs camera

    The Bobcat 320 TE0 and WL series are based on an in-house developed, uncooled InGaAs detector with a 320 x 256 pixel resolution.

    The Bobcat 320 TE0 and WL cameras are offered with GigE Vision interface, 400 Hz maximum frame rate and feature low weight and power.

    The Bobcat 320 WL comes with a windowless uncooled detector, specifically targeting laser beam analysis and laser wavefront sensing applications.

    Benefits & Features
    • Low cost
    • Flexible and easy-to-use
    • Low dark current
    • High speed 400 Hz
    • Windowless version optional (WL)

    Mechanical Specifications

    Bobcat 320 TE0 GigE 400 Bobcat 320 WL GigE 400
    Approximate dimensions - excluding lens [width x height x length] [mm] 55 x 55 x 74 55 x 55 x 74
    Weight [gr] - excluding lens 280 280
    Optical interface C-mount or M42 C-mount or M42
    Connector GigE RJ-45 RJ-45
    Connector CameraLink - -
    Connector power Hirose HR10-7R-SA[73] Hirose HR10-7R-SA[73]
    Connector trigger SMA SMA

    Environmental & Power Specifications

    Bobcat 320 TE0 GigE 400 Bobcat 320 WL GigE 400
    Operating case temperature [°C] From -40 to +70;
    also available in temperature range 0 - 50
    From -40 to +70;
    also available in temperature range 0 - 50
    Storage temperature [°C] From -45 to +85 From -45 to +85
    Power consumption [W] 4 4
    Power supply voltage DC 12 V DC 12 V
    Shock IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms] IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms]
    Vibration Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz] Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz]
    IP rating IP40 IP40
    Regulatory compliance CE, RoHS CE, RoHS

    Electro-Optical Specifications

    Bobcat 320 TE0 GigE 400 Bobcat 320 WL GigE 400
    Image format [pixels] 320 x 256 320 x 256
    Pixel pitch [µm] 20 20
    Detector type InGaAs photodiode array with CTIA ROIC InGaAs photodiode array with CTIA ROIC
    Sensor temperature stabilization Uncooled Uncooled and windowless detector
    Integration type Snapshot - global shutter Snapshot - global shutter
    Active area and diagonal [mm] 6.4 x 5.12 [diagonal 8.2] 6.4 x 5.12 [diagonal 8.2]
    Optical fill factor 100% 100%
    Spectral range [nm] 900 - 1700 900 - 1700
    Quantum efficiency ~80% [typical peak value] ~80% [typical peak value]
    Gain modes Single Gain Single Gain
    Full well capacities [electrons] 70k 70k
    Read noise [electrons] 110 110
    Dark current [electrons/second] <2E6 [for 150 mV reverse bias] typically <2E6 [for 150 mV reverse bias] typically
    Read out mode ITR ITR
    Pixel operability >99.5% >99.5%
    Preconfigured exposure time range [ms] 0.5 to 4 0.5 to 4
    Max frame rate [Hz] [full frame] 400 400
    Region of interest Yes Yes
    Min region size [pixels] 32 x 4 [step 4 x 1] 32 x 4 [step 4 x 1]
    Max frame rate [Hz] [min region size] >10000 >10000
    Analog-to-Digital [ADC] [bits] 14 14
    Command and control GigE Vision GigE Vision
    Digital output format GigE Vision [16 bit] GigE Vision [16 bit]
    Trigger In or out via SMA [Configurable] In or out via SMA [Configurable]

    Software

    Our standard IR software, Xeneth, is included with this camera. Find Out More

    Lenses

    Our cameras are compatible with a wide variety of lenses.

    We do not manufacture our own lenses, but instead offer a variety of third-party lenses that can be purchased directly from us. We guarantee compatibility for any lenses purchased directly from Xenics.

    Cables & Power Supplies

    Xenics develops flexible and modular cameras resulting in a wide variety of camera interfaces. All these interfaces require unique cabling which we keep in stock. Next to interface cables we also offer separate power supplies.

    Cases

    Xenics ships its infrared cameras all over the world in high-grade custom cases. As our infrared cameras have different sizes, we have several case-types in stock guaranteeing a tight fit. The cases are made of polypropylene which make them very sturdy. They are dustproof, watertight, stackable and can cope with temperatures between -40 °C and 80 °C. In addition they are equipped with an automatic air pressure compensation valve allowing us to ship the cameras all over the globe.

    Most of our infrared cameras come with a standard hardshell case upon purchasing.

    Filters

    A filter can be fitted in the C-mount lens adapter of most Xenics cameras. The following Xenics SWIR cameras have a standard filter holder in the C-mount adapter (only one filter can be mounted and filter has to be 25.4 mm in diameter):

    1. Bobcat 320 and 640
    2. Cheetah 640 CL
    3. Xeva 320 (exceptions: Xeva 2.35)
    4. Lynx

    In order to lock the filter in the c-mount adapter, the following filter retainer ring has to be ordered from Xenics, part number: MEC-000614

    For a list of suitable filters, please directly contact the filter supplier, Spectrogon, for filter purchases. Please check camera and filter documentation for compatible wavelength ranges.

    Part number Description
    XEN-000730 Bobcat 320 TE0 GigE 400
    XEN-000731 Bobcat 320 WL GigE 400

    Machine Vision

    Process Monitoring

    Scientific & Advanced Research

    Datasheets

    Download Datasheet

    Engineering files

    The compressed file contains technical files pertaining to this product. Typically it contains the following:

    • EASM (eDrawings Assembly) file for the camera.
    • STEP (Standard for the Exchange of Product Data) file for the camera.
    • Technical drawing for the camera.

    Bobcat 320 TE0 and WL Series

    Looking For More Details?

    Fill up the form below and our customer support team will get be glad to assist you with your queries.