Xeva 640 Series

Versatile, high resolution InGaAs camera for high dynamic range imaging

The Xeva 640 series is based on an in-house manufactured InGaAs detector with a 640 x 512 pixel resolution.

 

The Xeva 640 cameras are offered with frame rates of 90 Hz. The camera comes with a CameraLink interface. Sensor cooling is available for increased exposure time range.

 

Benefits & Features

 

• High dynamic range
• Sensor cooling available for increased exposure time range
• Low dark current
• CameraLink interfacing option
• Versatility with gain modes

Mechanical Specifications

Xeva 1.7 640 TE1 / TE3
Approximate dimensions - excluding lens [width x height x length] [mm] 88 x 111 x 107; 88 x 111 x 114 [TE3]
Weight [gr] - excluding lens 1300
Camera cooling Forced convection [fan]
Optical interface C-mount or M42
Connector USB Mini-USB
Connector CameraLink Standard MDR
Connector power 7-pin TRIAD 01
Connector trigger 5-pin TRIAD 01

Environmental & Power Specifications

Xeva 1.7 640 TE1 / TE3
Ambient operating temperature range [°C] From 0 to +50
Storage temperature [°C] From -40 to +80
Power consumption [W] Up to 30
Power supply voltage DC 12 V
Regulatory compliance CE, RoHS

Electro-Optical Specifications

Xeva 1.7 640 TE1 / TE3
Image format [pixels] 640 x 512
Pixel pitch [µm] 20
Detector type InGaAs photodiode array with DI ROIC
Sensor cooling TE cooler; 3-stage TE cooler [TE3]
Integration type Snapshot - global shutter
Active area and diagonal [mm] 12.8 x 10.24 [diagonal 16.4]
Optical fill factor 100%
Spectral range [nm] 900 - 1700
Quantum efficiency ~80% [typical peak value]
Gain modes 4 gain modes
Dark current [electrons/second] <200k at 280K sensor temperature; <20k at 233K sensor temperature [TE3]
Read out mode ITR
Pixel operability >99%
Preconfigured exposure time range [ms] 1 - 50; 1 - 100 [TE3] - max exposure time for TE3 is >10 seconds
Max frame rate [Hz] [full frame] 90
Region of interest Yes
Min region size [pixels] 128 x 8
Max frame rate [Hz] [min region size] >930
Analog-to-Digital [ADC] [bits] 14
Command and control USB 2.0
Digital output format CameraLink [14 bit] [max 25 Hz frame rate with USB 2.0]
Trigger In or out via trigger connector [Configurable] - only recommended with CameraLink data interface

Software

Our standard IR software, Xeneth, is included with this camera.

Find Out More

Lenses

Our cameras are compatible with a wide variety of lenses.

 

We do not manufacture our own lenses, but instead offer a variety of third-party lenses that can be purchased directly from us. We guarantee compatibility for any lenses purchased directly from Xenics.

Frame Grabbers

The Xenics product range includes several products that require a frame grabber card to connect the camera to a PC.

 

The Euresys GRABLINK full, Imperx VCE-CLEX01 and National Instruments PCIe-1433 frame grabbers are fully integrated in Xeneth and the Xeneth SDK. This means that you can use Xeneth software both to control the camera and to grab images making abstraction of the proprietary frame grabber software.

 

Other frame grabbers properly integrating the CameraLink and GigE Vision protocol can be used in Xeneth and the Xeneth SDK, however only for command and control of the camera. To grab images you rely on the dedicated software provided by the frame grabber vendors.

Cables & Power Supplies

Xenics develops flexible and modular cameras resulting in a wide variety of camera interfaces. All these interfaces require unique cabling which we keep in stock. Next to interface cables we also offer separate power supplies.

Cases

Xenics ships its infrared cameras all over the world in high-grade custom cases. As our infrared cameras have different sizes, we have several case-types in stock guaranteeing a tight fit. The cases are made of polypropylene which make them very sturdy. They are dustproof, watertight, stackable and can cope with temperatures between -40 °C and 80 °C. In addition they are equipped with an automatic air pressure compensation valve allowing us to ship the cameras all over the globe.

 

Most of our infrared cameras come with a standard hardshell case upon purchasing.

Filters

A filter can be fitted in the C-mount lens adapter of most Xenics cameras. The following Xenics SWIR cameras have a standard filter holder in the C-mount adapter (only one filter can be mounted and filter has to be 25.4 mm in diameter):

 
  1. Bobcat 320 and 640
  2. Cheetah 640 CL
  3. Xeva 320 and 640 (exceptions: Xeva 640 TE3, Xeva 2.35 and Xeva 2.5)
  4. Lynx
 

In order to lock the filter in the c-mount adapter, the following filter retainer ring has to be ordered from Xenics, part number: MEC-000614

 

For a list of suitable filters, please directly contact the filter supplier, Spectrogon, for filter purchases. Please check camera and filter documentation for compatible wavelength ranges.

Part number Description
XEN-000112 Xeva 1.7 640 TE1
XEN-000114 Xeva 1.7 640 TE3

Machine Vision

Safety & Security

Scientific & advanced research

Medical

Datasheets

 

Xeva 640 Series

 

Engineering files

 

The compressed file contains technical files pertaining to this product. Typically it contains the following:

  • EASM (eDrawings Assembly) file for the camera.
  • STEP (Standard for the Exchange of Product Data) file for the camera.
  • Technical drawing for the camera.
 

Xeva 640 Series

Looking For More Details?

Fill up the form below and our customer support team will get be glad to assist you with your queries.





    Xeva 640 Series

    Xeva 640 Series Image

    Versatile, high resolution InGaAs camera for high dynamic range imaging

    The Xeva 640 series is based on an in-house manufactured InGaAs detector with a 640 x 512 pixel resolution.

     

    The Xeva 640 cameras are offered with frame rates of 90 Hz. The camera comes with a CameraLink interface. Sensor cooling is available for increased exposure time range.

     

    Benefits & Features

     

    • High dynamic range
    • Sensor cooling available for increased exposure time range
    • Low dark current
    • CameraLink interfacing option
    • Versatility with gain modes

    Mechanical Specifications

    Xeva 1.7 640 TE1 / TE3
    Approximate dimensions - excluding lens [width x height x length] [mm] 88 x 111 x 107; 88 x 111 x 114 [TE3]
    Weight [gr] - excluding lens 1300
    Camera cooling Forced convection [fan]
    Optical interface C-mount or M42
    Connector USB Mini-USB
    Connector CameraLink Standard MDR
    Connector power 7-pin TRIAD 01
    Connector trigger 5-pin TRIAD 01

    Environmental & Power Specifications

    Xeva 1.7 640 TE1 / TE3
    Ambient operating temperature range [°C] From 0 to +50
    Storage temperature [°C] From -40 to +80
    Power consumption [W] Up to 30
    Power supply voltage DC 12 V
    Regulatory compliance CE, RoHS

    Electro-Optical Specifications

    Xeva 1.7 640 TE1 / TE3
    Image format [pixels] 640 x 512
    Pixel pitch [µm] 20
    Detector type InGaAs photodiode array with DI ROIC
    Sensor cooling TE cooler; 3-stage TE cooler [TE3]
    Integration type Snapshot - global shutter
    Active area and diagonal [mm] 12.8 x 10.24 [diagonal 16.4]
    Optical fill factor 100%
    Spectral range [nm] 900 - 1700
    Quantum efficiency ~80% [typical peak value]
    Gain modes 4 gain modes
    Dark current [electrons/second] <200k at 280K sensor temperature; <20k at 233K sensor temperature [TE3]
    Read out mode ITR
    Pixel operability >99%
    Preconfigured exposure time range [ms] 1 - 50; 1 - 100 [TE3] - max exposure time for TE3 is >10 seconds
    Max frame rate [Hz] [full frame] 90
    Region of interest Yes
    Min region size [pixels] 128 x 8
    Max frame rate [Hz] [min region size] >930
    Analog-to-Digital [ADC] [bits] 14
    Command and control USB 2.0
    Digital output format CameraLink [14 bit] [max 25 Hz frame rate with USB 2.0]
    Trigger In or out via trigger connector [Configurable] - only recommended with CameraLink data interface

    Software

    Our standard IR software, Xeneth, is included with this camera.

    Find Out More

    Lenses

    Our cameras are compatible with a wide variety of lenses.

     

    We do not manufacture our own lenses, but instead offer a variety of third-party lenses that can be purchased directly from us. We guarantee compatibility for any lenses purchased directly from Xenics.

    Frame Grabbers

    The Xenics product range includes several products that require a frame grabber card to connect the camera to a PC.

     

    The Euresys GRABLINK full, Imperx VCE-CLEX01 and National Instruments PCIe-1433 frame grabbers are fully integrated in Xeneth and the Xeneth SDK. This means that you can use Xeneth software both to control the camera and to grab images making abstraction of the proprietary frame grabber software.

     

    Other frame grabbers properly integrating the CameraLink and GigE Vision protocol can be used in Xeneth and the Xeneth SDK, however only for command and control of the camera. To grab images you rely on the dedicated software provided by the frame grabber vendors.

    Cables & Power Supplies

    Xenics develops flexible and modular cameras resulting in a wide variety of camera interfaces. All these interfaces require unique cabling which we keep in stock. Next to interface cables we also offer separate power supplies.

    Cases

    Xenics ships its infrared cameras all over the world in high-grade custom cases. As our infrared cameras have different sizes, we have several case-types in stock guaranteeing a tight fit. The cases are made of polypropylene which make them very sturdy. They are dustproof, watertight, stackable and can cope with temperatures between -40 °C and 80 °C. In addition they are equipped with an automatic air pressure compensation valve allowing us to ship the cameras all over the globe.

     

    Most of our infrared cameras come with a standard hardshell case upon purchasing.

    Filters

    A filter can be fitted in the C-mount lens adapter of most Xenics cameras. The following Xenics SWIR cameras have a standard filter holder in the C-mount adapter (only one filter can be mounted and filter has to be 25.4 mm in diameter):

     
    1. Bobcat 320 and 640
    2. Cheetah 640 CL
    3. Xeva 320 and 640 (exceptions: Xeva 640 TE3, Xeva 2.35 and Xeva 2.5)
    4. Lynx
     

    In order to lock the filter in the c-mount adapter, the following filter retainer ring has to be ordered from Xenics, part number: MEC-000614

     

    For a list of suitable filters, please directly contact the filter supplier, Spectrogon, for filter purchases. Please check camera and filter documentation for compatible wavelength ranges.

    Part number Description
    XEN-000112 Xeva 1.7 640 TE1
    XEN-000114 Xeva 1.7 640 TE3

    Machine Vision

    Safety & Security

    Scientific & advanced research

    Medical

    Datasheets

     

    Xeva 640 Series

     

    Engineering files

     

    The compressed file contains technical files pertaining to this product. Typically it contains the following:

    • EASM (eDrawings Assembly) file for the camera.
    • STEP (Standard for the Exchange of Product Data) file for the camera.
    • Technical drawing for the camera.
     

    Xeva 640 Series

    Looking For More Details?

    Fill up the form below and our customer support team will get be glad to assist you with your queries.