Xeva eSWIR Series

Compact T2SL based eSWIR camera

The Xeva eSWIR (extended short-wave infrared) series uses a a thermo-electrically T2SL detector with a 320 x 256 pixel resolution and response in the short-wave infrared (SWIR) band up to 2.5 μm.

 

The Xeva eSWIR cameras are offered with frame rates of more than 340 Hz. The camera comes with a CameraLink interface.

 

Benefits & Features

 

• Extended SWIR imaging up to 2.5 μm
• Thermo-electrically cooled
• CameraLink interface
• Versatility with gain modes

Mechanical Specifications

Xeva 2.35 320 100 / 350 Xeva 2.5 320 100 / 350
Approximate dimensions - excluding lens [width x height x length] [mm] 88 x 111 x 109 88 x 111 x 109
Weight [gr] - excluding lens 1300 1300
Camera cooling Forced convection [fan] Forced convection [fan]
Optical interface C-mount or M42 C-mount or M42
Connector USB Mini-USB Mini-USB
Connector CameraLink Standard MDR Standard MDR
Connector power LEMO EXP LEMO EXP
Connector trigger 5-pin TRIAD 01 5-pin TRIAD 01

Environmental & Power Specifications

Xeva 2.35 320 100 / 350 Xeva 2.5 320 100 / 350
Ambient operating temperature range [°C] From 0 to +50 From 0 to +50
Storage temperature [°C] From -40 to 80 From -40 to 80
Power consumption [W] Up to 84 Up to 84
Power supply voltage DC 24 V DC 24 V
Regulatory compliance CE, RoHS CE, RoHS

Electro-Optical Specifications

Xeva 2.35 320 100 / 350 Xeva 2.5 320 100 / 350
Image format [pixels] 320 x 256 320 x 256
Pixel pitch [µm] 30 30
Detector type T2SL photodiode array with CTIA ROIC T2SL photodiode array with CTIA ROIC
Sensor cooling 4-stage TE cooler 4-stage TE cooler
Integration type Snapshot - global shutter Snapshot - global shutter
Active area and diagonal [mm] 9.6 x 7.68 [diagonal 12.3] 9.6 x 7.68 [diagonal 12.3]
Optical fill factor 100% 100%
Spectral range [nm] 1000 to 2350 1000 to 2500
Gain modes High Gain [HG] and High Dynamic Range [HDR] High Gain [HG] and High Dynamic Range [HDR]
Full well capacities [electrons] 170k [HG] and 3.5M [HDR] 170k [HG] and 3.5M [HDR]
Read noise [electrons] 150 [HG] and 1000 [HDR] 150 [HG] and 1000 [HDR]
Dark current [electrons/second] <80M [at 200K sensor temperature] <320M [at 200K sensor temperature]
Read out mode ITR ITR
Pixel operability >99% >99%
Preconfigured exposure time range [ms] Up to 6 in HDR Up to 1.5 in HDR
Max frame rate [Hz] [full frame] 100 or 344 100 or 344
Region of interest Yes [not for 100 Hz model] Yes [not for 100 Hz model]
Min region size [pixels] 128 x 8 [not for 100 Hz model] 128 x 8 [not for 100 Hz model]
Max frame rate [Hz] [min region size] >10000 [not for 100 Hz model] >10000 [not for 100 Hz model]
Analog-to-Digital [ADC] [bits] 14 14
Command and control USB 2.0 USB 2.0
Digital output format CameraLink [14 bit] [max 100 Hz frame rate with USB 2.0] CameraLink [14 bit] [max 100 Hz frame rate with USB 2.0]
Trigger In or out via trigger connector [Configurable] - only recommended with CameraLink data interface In or out via trigger connector [Configurable] - only recommended with CameraLink data interface

Software

Our standard IR software, Xeneth, is included with this camera.

Find Out More

Lenses

Our cameras are compatible with a wide variety of lenses.

 

We do not manufacture our own lenses, but instead offer a variety of third-party lenses that can be purchased directly from us. We guarantee compatibility for any lenses purchased directly from Xenics.

Frame Grabbers

The Xenics product range includes several products that require a frame grabber card to connect the camera to a PC.

 

The Euresys GRABLINK full, Imperx VCE-CLEX01 and National Instruments PCIe-1433 frame grabbers are fully integrated in Xeneth and the Xeneth SDK. This means that you can use Xeneth software both to control the camera and to grab images making abstraction of the proprietary frame grabber software.

 

Other frame grabbers properly integrating the CameraLink and GigE Vision protocol can be used in Xeneth and the Xeneth SDK, however only for command and control of the camera. To grab images you rely on the dedicated software provided by the frame grabber vendors.

Cables & Power Supplies

Xenics develops flexible and modular cameras resulting in a wide variety of camera interfaces. All these interfaces require unique cabling which we keep in stock. Next to interface cables we also offer separate power supplies.

Cases

Xenics ships its infrared cameras all over the world in high-grade custom cases. As our infrared cameras have different sizes, we have several case-types in stock guaranteeing a tight fit. The cases are made of polypropylene which make them very sturdy. They are dustproof, watertight, stackable and can cope with temperatures between -40 °C and 80 °C. In addition they are equipped with an automatic air pressure compensation valve allowing us to ship the cameras all over the globe.

 

Most of our infrared cameras come with a standard hardshell case upon purchasing.

Filters

A filter can be fitted in the C-mount lens adapter of most Xenics cameras. The following Xenics SWIR cameras have a standard filter holder in the C-mount adapter (only one filter can be mounted and filter has to be 25.4 mm in diameter):

 
  1. Bobcat 320 and 640
  2. Cheetah 640 CL
  3. Xeva 320 and 640 (exceptions: Xeva 640 TE3, Xeva 2.35 and Xeva 2.5)
  4. Lynx
 

In order to lock the filter in the c-mount adapter, the following filter retainer ring has to be ordered from Xenics, part number: MEC-000614

 

For a list of suitable filters, please directly contact the filter supplier, Spectrogon, for filter purchases. Please check camera and filter documentation for compatible wavelength ranges.

Part number Description
XEN-000538 Xeva 2.35 320 100
XEN-000539 Xeva 2.35 320 350
XEN-000617 Xeva 2.5 320 100
XEN-000618 Xeva 2.5 320 350

Machine Vision

Safety & Security

Scientific & advanced research

Medical

Datasheets

 

Xeva eSWIR Series

 

Engineering files

 

The compressed file contains technical files pertaining to this product. Typically it contains the following:

  • EASM (eDrawings Assembly) file for the camera.
  • STEP (Standard for the Exchange of Product Data) file for the camera.
  • Technical drawing for the camera.
 

Xeva 2.35

Xeva 2.5

Looking For More Details?

Fill up the form below and our customer support team will get be glad to assist you with your queries.





    Xeva eSWIR Series

    Xeva eSWIR Series Image

    Compact T2SL based eSWIR camera

    The Xeva eSWIR (extended short-wave infrared) series uses a a thermo-electrically T2SL detector with a 320 x 256 pixel resolution and response in the short-wave infrared (SWIR) band up to 2.5 μm.

     

    The Xeva eSWIR cameras are offered with frame rates of more than 340 Hz. The camera comes with a CameraLink interface.

     

    Benefits & Features

     

    • Extended SWIR imaging up to 2.5 μm
    • Thermo-electrically cooled
    • CameraLink interface
    • Versatility with gain modes

    Mechanical Specifications

    Xeva 2.35 320 100 / 350 Xeva 2.5 320 100 / 350
    Approximate dimensions - excluding lens [width x height x length] [mm] 88 x 111 x 109 88 x 111 x 109
    Weight [gr] - excluding lens 1300 1300
    Camera cooling Forced convection [fan] Forced convection [fan]
    Optical interface C-mount or M42 C-mount or M42
    Connector USB Mini-USB Mini-USB
    Connector CameraLink Standard MDR Standard MDR
    Connector power LEMO EXP LEMO EXP
    Connector trigger 5-pin TRIAD 01 5-pin TRIAD 01

    Environmental & Power Specifications

    Xeva 2.35 320 100 / 350 Xeva 2.5 320 100 / 350
    Ambient operating temperature range [°C] From 0 to +50 From 0 to +50
    Storage temperature [°C] From -40 to 80 From -40 to 80
    Power consumption [W] Up to 84 Up to 84
    Power supply voltage DC 24 V DC 24 V
    Regulatory compliance CE, RoHS CE, RoHS

    Electro-Optical Specifications

    Xeva 2.35 320 100 / 350 Xeva 2.5 320 100 / 350
    Image format [pixels] 320 x 256 320 x 256
    Pixel pitch [µm] 30 30
    Detector type T2SL photodiode array with CTIA ROIC T2SL photodiode array with CTIA ROIC
    Sensor cooling 4-stage TE cooler 4-stage TE cooler
    Integration type Snapshot - global shutter Snapshot - global shutter
    Active area and diagonal [mm] 9.6 x 7.68 [diagonal 12.3] 9.6 x 7.68 [diagonal 12.3]
    Optical fill factor 100% 100%
    Spectral range [nm] 1000 to 2350 1000 to 2500
    Gain modes High Gain [HG] and High Dynamic Range [HDR] High Gain [HG] and High Dynamic Range [HDR]
    Full well capacities [electrons] 170k [HG] and 3.5M [HDR] 170k [HG] and 3.5M [HDR]
    Read noise [electrons] 150 [HG] and 1000 [HDR] 150 [HG] and 1000 [HDR]
    Dark current [electrons/second] <80M [at 200K sensor temperature] <320M [at 200K sensor temperature]
    Read out mode ITR ITR
    Pixel operability >99% >99%
    Preconfigured exposure time range [ms] Up to 6 in HDR Up to 1.5 in HDR
    Max frame rate [Hz] [full frame] 100 or 344 100 or 344
    Region of interest Yes [not for 100 Hz model] Yes [not for 100 Hz model]
    Min region size [pixels] 128 x 8 [not for 100 Hz model] 128 x 8 [not for 100 Hz model]
    Max frame rate [Hz] [min region size] >10000 [not for 100 Hz model] >10000 [not for 100 Hz model]
    Analog-to-Digital [ADC] [bits] 14 14
    Command and control USB 2.0 USB 2.0
    Digital output format CameraLink [14 bit] [max 100 Hz frame rate with USB 2.0] CameraLink [14 bit] [max 100 Hz frame rate with USB 2.0]
    Trigger In or out via trigger connector [Configurable] - only recommended with CameraLink data interface In or out via trigger connector [Configurable] - only recommended with CameraLink data interface

    Software

    Our standard IR software, Xeneth, is included with this camera.

    Find Out More

    Lenses

    Our cameras are compatible with a wide variety of lenses.

     

    We do not manufacture our own lenses, but instead offer a variety of third-party lenses that can be purchased directly from us. We guarantee compatibility for any lenses purchased directly from Xenics.

    Frame Grabbers

    The Xenics product range includes several products that require a frame grabber card to connect the camera to a PC.

     

    The Euresys GRABLINK full, Imperx VCE-CLEX01 and National Instruments PCIe-1433 frame grabbers are fully integrated in Xeneth and the Xeneth SDK. This means that you can use Xeneth software both to control the camera and to grab images making abstraction of the proprietary frame grabber software.

     

    Other frame grabbers properly integrating the CameraLink and GigE Vision protocol can be used in Xeneth and the Xeneth SDK, however only for command and control of the camera. To grab images you rely on the dedicated software provided by the frame grabber vendors.

    Cables & Power Supplies

    Xenics develops flexible and modular cameras resulting in a wide variety of camera interfaces. All these interfaces require unique cabling which we keep in stock. Next to interface cables we also offer separate power supplies.

    Cases

    Xenics ships its infrared cameras all over the world in high-grade custom cases. As our infrared cameras have different sizes, we have several case-types in stock guaranteeing a tight fit. The cases are made of polypropylene which make them very sturdy. They are dustproof, watertight, stackable and can cope with temperatures between -40 °C and 80 °C. In addition they are equipped with an automatic air pressure compensation valve allowing us to ship the cameras all over the globe.

     

    Most of our infrared cameras come with a standard hardshell case upon purchasing.

    Filters

    A filter can be fitted in the C-mount lens adapter of most Xenics cameras. The following Xenics SWIR cameras have a standard filter holder in the C-mount adapter (only one filter can be mounted and filter has to be 25.4 mm in diameter):

     
    1. Bobcat 320 and 640
    2. Cheetah 640 CL
    3. Xeva 320 and 640 (exceptions: Xeva 640 TE3, Xeva 2.35 and Xeva 2.5)
    4. Lynx
     

    In order to lock the filter in the c-mount adapter, the following filter retainer ring has to be ordered from Xenics, part number: MEC-000614

     

    For a list of suitable filters, please directly contact the filter supplier, Spectrogon, for filter purchases. Please check camera and filter documentation for compatible wavelength ranges.

    Part number Description
    XEN-000538 Xeva 2.35 320 100
    XEN-000539 Xeva 2.35 320 350
    XEN-000617 Xeva 2.5 320 100
    XEN-000618 Xeva 2.5 320 350

    Machine Vision

    Safety & Security

    Scientific & advanced research

    Medical

    Datasheets

     

    Xeva eSWIR Series

     

    Engineering files

     

    The compressed file contains technical files pertaining to this product. Typically it contains the following:

    • EASM (eDrawings Assembly) file for the camera.
    • STEP (Standard for the Exchange of Product Data) file for the camera.
    • Technical drawing for the camera.
     

    Xeva 2.35

    Xeva 2.5

    Looking For More Details?

    Fill up the form below and our customer support team will get be glad to assist you with your queries.