XSL SQ Series

Small InGaAs linescan camera module with square pixels

The XSL square (SQ) series, based on an in-house developed linear detector, offer affordable short-wave infrared (SWIR) linescan images.

 

The XSL SQ camera modules are able to image line rates up to 40 kHz. The modules come with an industry-standard CameraLink, GigE Vision or QTE Samtec interface.

 

Depending on your imaging requirements, three resolutions of 512, 1024 or 2048 pixels are offered.

 

Benefits & Features

• High speed linescan imaging up to 40 kHz
• High resolution
• CameraLink, GigE Vision or QTE Samtec interfacing

Mechanical Specifications

XSL 512 SQ CL / GigE XSL 512 SQ 16bitDV XSL 1024 SQ CL / GigE XSL 1024 SQ 16bitDV XSL 2048 SQ CL / GigE XSL 2048 SQ 16bitDV
Approximate dimensions - excluding lens [width x height x length] [mm] 45 x 45 x 37 [CL] 45 x 45 x 55 [GigE] 45 x 45 x 28 45 x 45 x 37 [CL] 45 x 45 x 55 [GigE 45 x 45 x 28 45 x 45 x 37 [CL] 45 x 45 x 55 [GigE] 45 x 45 x 28
Weight [gr] - excluding lens 55 [CL], 96 [GigE] 43 55 [CL], 96 [GigE] 43 55 [CL], 96 [GigE] 43
Optical interface [optional] M42, C-mount or F-mount M42, C-mount or F-mount M42, C-mount or F-mount M42, C-mount or F-mount M42, C-mount or F-mount M42, C-mount or F-mount
Connector CameraLink Standard SDR [CL] - Standard SDR [CL] - Standard SDR [CL] -
Connector GigE RJ-45 [GigE] - RJ-45 [GigE] - RJ-45 [GigE] -
Connector power Hirose HR10-7R-SA[73] - Hirose HR10-7R-SA[73] - Hirose HR10-7R-SA[73] -
Connector trigger SMA - SMA - SMA -
Connector general I/O - QTE-20-02-L-D-A Samtec - QTE-20-02-L-D-A Samtec - QTE-20-02-L-D-A Samtec

Environmental & Power Specifications

XSL 512 SQ CL / GigE XSL 512 SQ 16bitDV XSL 1024 SQ CL / GigE XSL 1024 SQ 16bitDV XSL 2048 SQ CL / GigE XSL 2048 SQ 16bitDV
Ambient operating temperature range [°C] From -40 to +70 From -40 to +70 From -40 to +70 From -40 to +70 From -40 to +70 From -40 to +70
Storage temperature [°C] From -50 to +85 From -50 to +85 From -50 to +85 From -50 to +85 From -50 to +85 From -50 to +85
Power consumption [W] 2.6 [CL], 4.6 [GigE] 2.3 2.6 [CL], 4.6 [GigE] 2.3 2.6 [CL], 4.6 [GigE] 2.3
Power supply voltage DC 12 V DC 3.3 V DC 12 V DC 3.3 V DC 12 V DC 3.3 V
Shock IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms] IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms] IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms] IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms] IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms] IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms]
Vibration Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz] Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz] Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz] Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz] Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz] Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz]
Regulatory compliance RoHS RoHS RoHS RoHS RoHS RoHS

Electro-Optical Specifications

XSL 512 SQ CL / GigE XSL 512 SQ 16bitDV XSL 1024 SQ CL / GigE XSL 1024 SQ 16bitDV XSL 2048 SQ CL / GigE XSL 2048 SQ 16bitDV
Sensor format [pixels] 512 512 1024 1024 2048 2048
Pixel pitch [µm] 25 25 12.5 12.5 12.5 12.5
Pixel height [µm] 25 25 12.5 12.5 12.5 12.5
Detector type InGaAs photodiode array with CTIA ROIC InGaAs photodiode array with CTIA ROIC InGaAs photodiode array with CTIA ROIC InGaAs photodiode array with CTIA ROIC InGaAs photodiode array with CTIA ROIC InGaAs photodiode array with CTIA ROIC
Integration type Snapshot - global shutter Snapshot - global shutter Snapshot - global shutter Snapshot - global shutter Snapshot - global shutter Snapshot - global shutter
Spectral range [nm] 900 - 1700 900 - 1700 900 - 1700 900 - 1700 900 - 1700 900 - 1700
Quantum efficiency ~80% [typical peak value] ~80% [typical peak value] ~80% [typical peak value] ~80% [typical peak value] ~80% [typical peak value] ~80% [typical peak value]
Full well capacities [electrons] 450k to 32M 450k to 32M 450k to 32M 450k to 32M 450k to 10M 450k to 10M
Read out mode IWR and ITR IWR and ITR IWR and ITR IWR and ITR IWR and ITR IWR and ITR
Pixel operability >99.6% >99.6% >99% >99% >98% >98%
Max line rate [kHz] 40 40 40 40 10 10
Analog-to-Digital [ADC] [bits] 14 14 14 14 14 14
Command and control CameraLink or GigE Vision QTE Samtec CameraLink or GigE Vision QTE Samtec CameraLink or GigE Vision QTE Samtec
Digital output format CameraLink or GigE Vision [16 bit] Digital Video [16 bit] CameraLink or GigE Vision [16 bit] Digital Video [16 bit] CameraLink or GigE Vision [16 bit] Digital Video [16 bit]
Trigger In or out via SMA [configurable]. For CL - additional trigger in available via CC1 In or out via QTE Samtec [configurable] In or out via SMA [configurable]. For CL - additional trigger in available via CC1 In or out via QTE Samtec [configurable] In or out via SMA [configurable]. For CL - additional trigger in available via CC1 In or out via QTE Samtec [configurable]

Software

Our standard IR software, Xeneth, is included with this camera.

Find Out More

Lenses

Our cameras are compatible with a wide variety of lenses.

 

We do not manufacture our own lenses, but instead offer a variety of third-party lenses that can be purchased directly from us. We guarantee compatibility for any lenses purchased directly from Xenics.

Frame Grabbers

The Xenics product range includes several products that require a frame grabber card to connect the camera to a PC.

 

The Euresys GRABLINK full, Imperx VCE-CLEX01 and National Instruments PCIe-1433 frame grabbers are fully integrated in Xeneth and the Xeneth SDK. This means that you can use Xeneth software both to control the camera and to grab images making abstraction of the proprietary frame grabber software.

 

Other frame grabbers properly integrating the CameraLink and GigE Vision protocol can be used in Xeneth and the Xeneth SDK, however only for command and control of the camera. To grab images you rely on the dedicated software provided by the frame grabber vendors.

Cables & Power Supplies

Xenics develops flexible and modular cameras resulting in a wide variety of camera interfaces. All these interfaces require unique cabling which we keep in stock. Next to interface cables we also offer separate power supplies.

Cases

Xenics ships its infrared cameras all over the world in high-grade custom cases. As our infrared cameras have different sizes, we have several case-types in stock guaranteeing a tight fit. The cases are made of polypropylene which make them very sturdy. They are dustproof, watertight, stackable and can cope with temperatures between -40 °C and 80 °C. In addition they are equipped with an automatic air pressure compensation valve allowing us to ship the cameras all over the globe.
Most of our infrared cameras come with a standard hardshell case upon purchasing.

Filters

A filter can be fitted in the C-mount lens adapter of most Xenics cameras. The following Xenics SWIR cameras have a standard filter holder in the C-mount adapter (only one filter can be mounted and filter has to be 25.4 mm in diameter):

 
  1. Bobcat 320 and 640
  2. Cheetah 640 CL
  3. Xeva 320 and 640 (exceptions: Xeva 640 TE3, Xeva 2.35 and Xeva 2.5)
  4. Lynx
 

In order to lock the filter in the c-mount adapter, the following filter retainer ring has to be ordered from Xenics, part number: MEC-000614

 

For a list of suitable filters, please directly contact the filter supplier, Spectrogon, for filter purchases. Please check camera and filter documentation for compatible wavelength ranges.

Part number Description
XEN-000393 XSL 512 SQ CL
XEN-000397 XSL 512 SQ GigE
XEN-000145 XSL 512 SQ 16bitDV
XEN-000395 XSL 1024 SQ CL
XEN-000398 XSL 1024 SQ GigE
XEN-000392 XSL 1024 SQ 16bitDV
XEN-000396 XSL 2048 SQ CL
XEN-000399 XSL 2048 SQ GigE
XEN-000394 XSL 2048 SQ 16bitDV

Machine Vision

Process Monitoring

Datasheets

 

XSL SQ Series

 

Engineering files

 

The compressed file contains technical files pertaining to this product. Typically it contains the following:

  • EASM (eDrawings Assembly) file for the camera.
  • STEP (Standard for the Exchange of Product Data) file for the camera.
  • Technical drawing for the camera.
 

XSL SQ Series

Looking For More Details?

Fill up the form below and our customer support team will get be glad to assist you with your queries.





    XSL SQ Series

    XSL SQ Series Image

    Small InGaAs linescan camera module with square pixels

    The XSL square (SQ) series, based on an in-house developed linear detector, offer affordable short-wave infrared (SWIR) linescan images.

     

    The XSL SQ camera modules are able to image line rates up to 40 kHz. The modules come with an industry-standard CameraLink, GigE Vision or QTE Samtec interface.

     

    Depending on your imaging requirements, three resolutions of 512, 1024 or 2048 pixels are offered.

     

    Benefits & Features

    • High speed linescan imaging up to 40 kHz
    • High resolution
    • CameraLink, GigE Vision or QTE Samtec interfacing

    Mechanical Specifications

    XSL 512 SQ CL / GigE XSL 512 SQ 16bitDV XSL 1024 SQ CL / GigE XSL 1024 SQ 16bitDV XSL 2048 SQ CL / GigE XSL 2048 SQ 16bitDV
    Approximate dimensions - excluding lens [width x height x length] [mm] 45 x 45 x 37 [CL] 45 x 45 x 55 [GigE] 45 x 45 x 28 45 x 45 x 37 [CL] 45 x 45 x 55 [GigE 45 x 45 x 28 45 x 45 x 37 [CL] 45 x 45 x 55 [GigE] 45 x 45 x 28
    Weight [gr] - excluding lens 55 [CL], 96 [GigE] 43 55 [CL], 96 [GigE] 43 55 [CL], 96 [GigE] 43
    Optical interface [optional] M42, C-mount or F-mount M42, C-mount or F-mount M42, C-mount or F-mount M42, C-mount or F-mount M42, C-mount or F-mount M42, C-mount or F-mount
    Connector CameraLink Standard SDR [CL] - Standard SDR [CL] - Standard SDR [CL] -
    Connector GigE RJ-45 [GigE] - RJ-45 [GigE] - RJ-45 [GigE] -
    Connector power Hirose HR10-7R-SA[73] - Hirose HR10-7R-SA[73] - Hirose HR10-7R-SA[73] -
    Connector trigger SMA - SMA - SMA -
    Connector general I/O - QTE-20-02-L-D-A Samtec - QTE-20-02-L-D-A Samtec - QTE-20-02-L-D-A Samtec

    Environmental & Power Specifications

    XSL 512 SQ CL / GigE XSL 512 SQ 16bitDV XSL 1024 SQ CL / GigE XSL 1024 SQ 16bitDV XSL 2048 SQ CL / GigE XSL 2048 SQ 16bitDV
    Ambient operating temperature range [°C] From -40 to +70 From -40 to +70 From -40 to +70 From -40 to +70 From -40 to +70 From -40 to +70
    Storage temperature [°C] From -50 to +85 From -50 to +85 From -50 to +85 From -50 to +85 From -50 to +85 From -50 to +85
    Power consumption [W] 2.6 [CL], 4.6 [GigE] 2.3 2.6 [CL], 4.6 [GigE] 2.3 2.6 [CL], 4.6 [GigE] 2.3
    Power supply voltage DC 12 V DC 3.3 V DC 12 V DC 3.3 V DC 12 V DC 3.3 V
    Shock IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms] IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms] IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms] IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms] IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms] IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms]
    Vibration Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz] Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz] Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz] Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz] Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz] Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz]
    Regulatory compliance RoHS RoHS RoHS RoHS RoHS RoHS

    Electro-Optical Specifications

    XSL 512 SQ CL / GigE XSL 512 SQ 16bitDV XSL 1024 SQ CL / GigE XSL 1024 SQ 16bitDV XSL 2048 SQ CL / GigE XSL 2048 SQ 16bitDV
    Sensor format [pixels] 512 512 1024 1024 2048 2048
    Pixel pitch [µm] 25 25 12.5 12.5 12.5 12.5
    Pixel height [µm] 25 25 12.5 12.5 12.5 12.5
    Detector type InGaAs photodiode array with CTIA ROIC InGaAs photodiode array with CTIA ROIC InGaAs photodiode array with CTIA ROIC InGaAs photodiode array with CTIA ROIC InGaAs photodiode array with CTIA ROIC InGaAs photodiode array with CTIA ROIC
    Integration type Snapshot - global shutter Snapshot - global shutter Snapshot - global shutter Snapshot - global shutter Snapshot - global shutter Snapshot - global shutter
    Spectral range [nm] 900 - 1700 900 - 1700 900 - 1700 900 - 1700 900 - 1700 900 - 1700
    Quantum efficiency ~80% [typical peak value] ~80% [typical peak value] ~80% [typical peak value] ~80% [typical peak value] ~80% [typical peak value] ~80% [typical peak value]
    Full well capacities [electrons] 450k to 32M 450k to 32M 450k to 32M 450k to 32M 450k to 10M 450k to 10M
    Read out mode IWR and ITR IWR and ITR IWR and ITR IWR and ITR IWR and ITR IWR and ITR
    Pixel operability >99.6% >99.6% >99% >99% >98% >98%
    Max line rate [kHz] 40 40 40 40 10 10
    Analog-to-Digital [ADC] [bits] 14 14 14 14 14 14
    Command and control CameraLink or GigE Vision QTE Samtec CameraLink or GigE Vision QTE Samtec CameraLink or GigE Vision QTE Samtec
    Digital output format CameraLink or GigE Vision [16 bit] Digital Video [16 bit] CameraLink or GigE Vision [16 bit] Digital Video [16 bit] CameraLink or GigE Vision [16 bit] Digital Video [16 bit]
    Trigger In or out via SMA [configurable]. For CL - additional trigger in available via CC1 In or out via QTE Samtec [configurable] In or out via SMA [configurable]. For CL - additional trigger in available via CC1 In or out via QTE Samtec [configurable] In or out via SMA [configurable]. For CL - additional trigger in available via CC1 In or out via QTE Samtec [configurable]

    Software

    Our standard IR software, Xeneth, is included with this camera.

    Find Out More

    Lenses

    Our cameras are compatible with a wide variety of lenses.

     

    We do not manufacture our own lenses, but instead offer a variety of third-party lenses that can be purchased directly from us. We guarantee compatibility for any lenses purchased directly from Xenics.

    Frame Grabbers

    The Xenics product range includes several products that require a frame grabber card to connect the camera to a PC.

     

    The Euresys GRABLINK full, Imperx VCE-CLEX01 and National Instruments PCIe-1433 frame grabbers are fully integrated in Xeneth and the Xeneth SDK. This means that you can use Xeneth software both to control the camera and to grab images making abstraction of the proprietary frame grabber software.

     

    Other frame grabbers properly integrating the CameraLink and GigE Vision protocol can be used in Xeneth and the Xeneth SDK, however only for command and control of the camera. To grab images you rely on the dedicated software provided by the frame grabber vendors.

    Cables & Power Supplies

    Xenics develops flexible and modular cameras resulting in a wide variety of camera interfaces. All these interfaces require unique cabling which we keep in stock. Next to interface cables we also offer separate power supplies.

    Cases

    Xenics ships its infrared cameras all over the world in high-grade custom cases. As our infrared cameras have different sizes, we have several case-types in stock guaranteeing a tight fit. The cases are made of polypropylene which make them very sturdy. They are dustproof, watertight, stackable and can cope with temperatures between -40 °C and 80 °C. In addition they are equipped with an automatic air pressure compensation valve allowing us to ship the cameras all over the globe.
    Most of our infrared cameras come with a standard hardshell case upon purchasing.

    Filters

    A filter can be fitted in the C-mount lens adapter of most Xenics cameras. The following Xenics SWIR cameras have a standard filter holder in the C-mount adapter (only one filter can be mounted and filter has to be 25.4 mm in diameter):

     
    1. Bobcat 320 and 640
    2. Cheetah 640 CL
    3. Xeva 320 and 640 (exceptions: Xeva 640 TE3, Xeva 2.35 and Xeva 2.5)
    4. Lynx
     

    In order to lock the filter in the c-mount adapter, the following filter retainer ring has to be ordered from Xenics, part number: MEC-000614

     

    For a list of suitable filters, please directly contact the filter supplier, Spectrogon, for filter purchases. Please check camera and filter documentation for compatible wavelength ranges.

    Part number Description
    XEN-000393 XSL 512 SQ CL
    XEN-000397 XSL 512 SQ GigE
    XEN-000145 XSL 512 SQ 16bitDV
    XEN-000395 XSL 1024 SQ CL
    XEN-000398 XSL 1024 SQ GigE
    XEN-000392 XSL 1024 SQ 16bitDV
    XEN-000396 XSL 2048 SQ CL
    XEN-000399 XSL 2048 SQ GigE
    XEN-000394 XSL 2048 SQ 16bitDV

    Machine Vision

    Process Monitoring

    Datasheets

     

    XSL SQ Series

     

    Engineering files

     

    The compressed file contains technical files pertaining to this product. Typically it contains the following:

    • EASM (eDrawings Assembly) file for the camera.
    • STEP (Standard for the Exchange of Product Data) file for the camera.
    • Technical drawing for the camera.
     

    XSL SQ Series

    Looking For More Details?

    Fill up the form below and our customer support team will get be glad to assist you with your queries.